Energy Disequilibrium Effects in Heat Treatment Equipment
Abstract
The differences found between heat fluxes in different areas of the heat treatment equipment workspace, due to energy disequilibrium or due to improper positioning of loading, can cause non-uniform temperatures and heat stress distributions which will impair the quality of heat processing.
In industrial practices, the unilateral heating is often requested for heat processing of certain products and, as a consequence, the heating rate represents a key factor which has to be known and controlled in order to avoid the possible disequilibrium occurring in the distribution of heat stresses.
The paper aims to assess by calculation of asymmetric heating effects of heat treated products occurring by improper operation of heat treatment equipment or by improper positioning of loading in the heat treatment equipment workspace.
Downloads
References
[2]. J. H. Brunklaus, Cuptoare industriale (Industrial Furnaces), Editura Tehnicǎ, Bucureşti, 1977.
[3]. C. Samoilă, L. Drugǎ, Cuptoare şi instalaţii de încǎlzire (Heating furnaces and installations), Ed. Didacticǎ şi Pedagogicǎ, Bucureşi, 1985.
[4]. C. Samoilă, L. Drugǎ, Tehnologii şi instalaţii moderne de încǎlzire în metalurgie (Modern heating technologies and installations in metallurgy), Ed. Tehnicǎ, Bucureşti, 1987.
[5]. N. Iu Taiţ, Tehnologhia nagreva stali, Metalurghizdat, Moskva, 1962.
[6]. M. Cojocaru, M. Târcolea, Modelarea interacţiunilor fizicochimice ale produselor metalice cu mediile, (Modelling of the phsico-chemical interaction of the metallic products), MATRIX ROM, Bucureşti, 1998.
[7]. W. Aung, L. S. Fletcher, V. Semas, Developing laminar free convection between vertical flat plates with asymmetric heating, in International Journal of Heat and Mass Transfer, vol. 15, Issue 11, p. 2293-2304, 1972.
[8]. Y. Demirel, B. A. Abu-Al-Saud, H. H. Al-Ali, Y. Makkawi, Packing size and Shape effects on forced convection in large rectangular packed ducts with asymmetric heating, in International Journal of Heat and Mass Transfer, vol. 42, issue 17, p. 3267-3277, 1999.
[9]. A. I. Pehovici, V. M. Jidkih, Rasciotî teplovogo tejima tveordîh tel, Izd. Energhia, Leningrad, 1976.
[10]. L. S. Kaţevici, Teoria teploperedaci i teplovîie rasciotî electriceskih pecei, Izd. Energhia, Moskva, 1977.
[11]. ***, Tratat de Ştiinţa şi Ingineria materialelor, vol. VI - Proiectare-Calitatea produselor - Materiale speciale-Inginerie economicǎ metalurgicǎ, (Book of Materials Science and Engineering, vol. VI, Design – Products Ouality – Special Materials – Economic metallurgical engineering), Editura AGIR, Bucureşti, 2014.
[12]. ***, Tabliţî fiziceschih velicin, Spravocinik, Atomizdat, Moskva, 1976.
[13]. ***, Metallovedenie i termiceskaia obrabotka stali, vol. I, Spravocinik, Moskva, 1961.
