Influence of Thermal Treatment on Zirconia Powder

  • Livia GHEORGHIES "Dunarea de Jos" University of Galati, Romania
Keywords: zirconia, powder, temperature, structure

Abstract

Zirconia powder in amorphous state was prepared by electrolytic deposition method (ELD) and then it was subjected to a thermal treatment according to a typical diagram. The structural changes in zirconia powder induced by thermal treatment have been pointed out by X-Ray diffraction (XRD), thermogravimetric analysis (TGA) and differential thermoanalysis (DTA) techniques. During thermal treatment, XRD patterns and DTA curves showed the presence of a mixture of two crystalline phases well-formed at approximately 400 oC and a transformation of the type tetragonal-monoclinic (t→m) at approximately 600 oC. In situ XRD study allowed establishing the growth kinetics of crystalline phases. Using experimental maximum intensities, H(hkl) and integral intensities, I(hkl), of XRD peaks, the volume fractions, Vm, and Vt, of m and t phases, respectively, present in a polymorphic mixture were calculated.

Creative Commons License

Downloads

Download data is not yet available.

References

[1]. A.K. Bandyopadhyay - Nano Materials, New Age International, New Delhi, (2008).
[2]. K.C. Patil, M.S. Hedge, T. Rattan and S.T. Aruna - World Scientific, New Jersey, (2008).
[3]. J.-P. Maria, D. Wicaksana, A. I. Kingon, B. Busch, H. Schulte, E. Garfunkel, and T. Gustafsson - J. Appl. Phys. 90, 3476 (2001).
[4]. G. D. Wilk, R. M. Wallace, and J. M. Anthony - J. Appl. Phys. 87,484 (2000).
[5]. C. J. Först, C. R. Ashman, K. Schwarz, and P. E. Blöchl - Nature London 427,53 (2003).
[6]. JCPDS Database, International Center for Diffraction Data (2003).
[7]. S. Shukla, S. Seal, R. Vij and S. Bandyopadhyay - J. Nanopart. Res. 4, 553-559 (2002).
[8] J. Tang et.al - Adv. Funct. Mater. 15, 1595-1602 (2005).
[9]. M. Bhagwat, V. Ramaswamy, Materials Research Bulletin 39 1627–1640 (2004).
[10]. J. Chevalier, L. Gremillard, A. V. Virkar and D. R. Clarke - J. Am. Ceram. Soc.,92 [9] 1901–1920 (2009).
[11]. F. Zhang et.al. - Analyses Chem. Mater., 19, 3118-3126 (2007).
[12]. J. R. Kelly and I. Denry - Dental Materials 24 289–298 (2008).
[13]. R. H.J. Hannink, P. M. Kelly and B. C. Muddle - J. Am. Ceram.Soc. 83[3] 461-487 (2000).
[14]. C. Gheorghies, L. Gheorghies - Sept. 18-21, Leganes, Madrid, Spain, p.455-459 (2001).
[15]. H. Toraya, M. Yoshimura, and S. Somiya - J. Am. Ceram. Soc., 67 [6] C119–21 (1984).
[16]. V. Santos, M. Zeni, C.P. Bergmann and J.M. Hohemberger - Rev.Adv.Mater.Sci. 17, 62-70 (2008).
Published
2013-06-15
How to Cite
1.
GHEORGHIES L. Influence of Thermal Treatment on Zirconia Powder. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Jun.2013 [cited 26Dec.2024];36(2):10-3. Available from: https://gup.ugal.ro/ugaljournals/index.php/mms/article/view/2831
Section
Articles

Most read articles by the same author(s)