Behavior of Refractories in Interaction with Metallurgical Slag

  • Florentina POTECAŞU "Dunarea de Jos" University of Galati, Romania
  • Marcela MUNTEAN Politehnica University of Bucharest, Romania
  • Mariana IVAN ArcelorMittal Galaţi, Romania

Résumé

The aim of this paper is to present the studies concerning behavior of the refractory to metallurgical slag corrosion. The corrosion resistance at high temperatures using the static method on samples containing chamotte or alumina were performed. The corrosion degree of refractory plastic mass was established by corrosion determination, and the corrosion rate and macroscopic image analysis measurements. The analysis of samples subjected to macroscopic measurements showed a better behavior in terms of corrosion resistance for alumina samples.

Creative Commons License

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

Références

[1]. Joardar A. - Refractory lining, Steel Industry, Slag corrosion (Slag attack), Test of Refractory, June, 25, (2009).
[2]. Stubbles J. - Steel Industry Consultant, The basic Oxygen Steelmaking (BOS) Process, American Iron and Steel Institute, (2012).
[3]. Brosnan D. A. - Corrosion of Refractories, Refractories Handbook edited by Charles A, Schacht, Marcel Dekker, New York, NY 10016, Clemson University.
[4]. Deinet T., Pötschke J. - Corrosion of AMC Bricks, Proc. 44th Int. Coll. on Refractories, 26/27 Sept., (2001), Aachen.
[5]. Pötschke J., Deinet T., Routschka G., Simmat R. - Properties and Corrosion of AMC-Refractories, Part II: Corrosion by Steel/Slag. Proc. UNITECR’03, Cancun, Mexico (2003) S. pp 84-87.
[6]. Pötschke J., Deinet T. - The Wear of Refractories by Steel/Slag. Proc. UNITECR’05, Orlando, USA, (2005).
[7]. Pötschke J., Deinet T. - Premature corrosion of refractories by steel and slag, Steelmaking, Millenium Steel, (2005).
[8]. Mukai K., Toguri J., Yoshitomi - Corrosion of Alumina–Grafite Refractories at the Slag - Metal Interface, Canadian Metallurgical Quaterly, no. 4, October/December, (1986), pp. 265-275 (11).
[9]. Smothers W., Cooper A. R. - Kinetics of Refractory Corrosion, The American Ceramic Society, (1981), Published Online, (2008).
[10]. Ivan M., Muntean M., Potecaşu F. - Special Refractory masses for aplication in the iron and steel making area, Revista Română de Materiale / Romanian Journal of Materials, (2012), 42 (1), 46-53.
[11]. Ivan M. - Utilizarea produselor refractare în siderurgie, Editura Standardizarea, Bucureşti, (2009), pp. 252-253.
Publiée
2012-12-15
Rubrique
Articles