Some Aspects Regarding the Influence of the Tribologycal Factors on the Superficial Layers of Treated Steels with Plasma Nitriding
Keywords:
plasma nitriding process, wear process, tribological parameters
Abstract
Some 38MoCrAl09 (SAE 4038) steel grade samples were subjected to plasma nitriding treatment regimes. The structural and diffractometric aspects of the superficial layers of the steel are studied after the wear tests by friction, using an Amsler type machine, taking two sliding degrees at different contact pressures and testing time. The tests were made to detect the sustainability to the material, the evolution of the superficial layer through different tests and to establish the influence of these tribological factors (operating parameters) on the superficial layers.
Downloads
Download data is not yet available.
References
[1]. Gheorghies, C., Papadatu, C.P., Ştefănescu, I. - “Study on the model of behaviour of some non-conventional treated steels, during friction process”, CENTIMFE, Marinha Grande, Portugal, 2004.
[2]. Preda,A., Levcovici,S., Papadatu,C. - “Research works regarding the influence of the nitrided layer structural properties on the wear behaviour of the turbo-blowers pinions and gear wheels”, ROTRIB 2003, Galati.
[3]. Popescu, N. et al. - Tratamente termice neconvenţionale, Ed. Tehnica, Bucureşti, 1990.
[4]. Papadatu, C.P. - Cercetări privind ameliorarea proprietăţilor şi creşterea fiabilităţii unor oţeluri folosite în construcţia utilajelor metalurgice, PhD Thesis, University “Dunarea de Jos” of Galati, 2005.
[5]. Papadatu, C.P. - Aspects regarding tribological behaviour of nitrocarburized superficial layer applied after thermo-magnetic treatments, using X-ray diffractometry, Buletinul Institutului Politehnic din IASI, Tomul L, Fasc. 6A , 2008.
[6]. Levcovici, S, s.a.- Ingineria suprafetelor, Note de curs.
[7]. Crudu, I., Palaghian, L., Gheorghies, C. -“Structural modifications in the superficial layer of metallic material in wear and fatigue process”, Japan International Tribology Conference, Nagoya, 2004.
[8]. Bursuc I., Gheorghies C. - “Influence of the internal stresses on the physico-mechanical properties of metals”, Analele Stiintifice ale Universitatii Al .I. Cuza din Iasi, Fizica Solidelor, Tomul XXXVIII-XXXIX, 2000.
[9]. Crudu I., Gheorghies C. - Incercarea materialelor, Editura Tehnică, Bucuresti, 1986.
[10]. Crudu I. et al. - “Structural modification in the superficial layer of the material in wear and fatigue processes”, Nagoya, Japan., 1990.
[11]. Gheorghieş C., Crudu I. - “A Cybernetic Structural Model Applied to the Study of Friction Process”, NORDTRIB 2000, Porvoo, Finland.
[12]. Gheorghies C. - Modificari structurale in procese de uzura si oboseala, Editura Tehnica, 1999, Bucuresti.
[13]. Gheorghieş C. - Metode fizice de control nedistructiv, Editura Porto-Franco, Galati, 1999.
[14]. Bucşă M., Crudu I., Gheorghies C. - Experimental study of the failure processes within some metallic and ceramic coatings”,Thesaloniki, Greece., 1999.
[15]. Papadatu, C.-P., Bordei, M. - “Changes in Tribological Behaviour of Thermo-Chemical Treated Steels after ThermoMagnetic Treatments”, Metalurgia International Revue, vol. XV, Special Issue no. 8, ISSN 1582-2214 , p.41-49, 2010.
[16]. Ştefănescu I., Gheorghies C. - Difractometric Study of the Structural Instabilities in Rolling-Bearing Steels, Buletinul Institutului Politehnic din Iasi, Tomul XLVI (L), Fasc. 3-4., 2000.
[2]. Preda,A., Levcovici,S., Papadatu,C. - “Research works regarding the influence of the nitrided layer structural properties on the wear behaviour of the turbo-blowers pinions and gear wheels”, ROTRIB 2003, Galati.
[3]. Popescu, N. et al. - Tratamente termice neconvenţionale, Ed. Tehnica, Bucureşti, 1990.
[4]. Papadatu, C.P. - Cercetări privind ameliorarea proprietăţilor şi creşterea fiabilităţii unor oţeluri folosite în construcţia utilajelor metalurgice, PhD Thesis, University “Dunarea de Jos” of Galati, 2005.
[5]. Papadatu, C.P. - Aspects regarding tribological behaviour of nitrocarburized superficial layer applied after thermo-magnetic treatments, using X-ray diffractometry, Buletinul Institutului Politehnic din IASI, Tomul L, Fasc. 6A , 2008.
[6]. Levcovici, S, s.a.- Ingineria suprafetelor, Note de curs.
[7]. Crudu, I., Palaghian, L., Gheorghies, C. -“Structural modifications in the superficial layer of metallic material in wear and fatigue process”, Japan International Tribology Conference, Nagoya, 2004.
[8]. Bursuc I., Gheorghies C. - “Influence of the internal stresses on the physico-mechanical properties of metals”, Analele Stiintifice ale Universitatii Al .I. Cuza din Iasi, Fizica Solidelor, Tomul XXXVIII-XXXIX, 2000.
[9]. Crudu I., Gheorghies C. - Incercarea materialelor, Editura Tehnică, Bucuresti, 1986.
[10]. Crudu I. et al. - “Structural modification in the superficial layer of the material in wear and fatigue processes”, Nagoya, Japan., 1990.
[11]. Gheorghieş C., Crudu I. - “A Cybernetic Structural Model Applied to the Study of Friction Process”, NORDTRIB 2000, Porvoo, Finland.
[12]. Gheorghies C. - Modificari structurale in procese de uzura si oboseala, Editura Tehnica, 1999, Bucuresti.
[13]. Gheorghieş C. - Metode fizice de control nedistructiv, Editura Porto-Franco, Galati, 1999.
[14]. Bucşă M., Crudu I., Gheorghies C. - Experimental study of the failure processes within some metallic and ceramic coatings”,Thesaloniki, Greece., 1999.
[15]. Papadatu, C.-P., Bordei, M. - “Changes in Tribological Behaviour of Thermo-Chemical Treated Steels after ThermoMagnetic Treatments”, Metalurgia International Revue, vol. XV, Special Issue no. 8, ISSN 1582-2214 , p.41-49, 2010.
[16]. Ştefănescu I., Gheorghies C. - Difractometric Study of the Structural Instabilities in Rolling-Bearing Steels, Buletinul Institutului Politehnic din Iasi, Tomul XLVI (L), Fasc. 3-4., 2000.
Published
2012-12-15
How to Cite
1.
PAPADATU CP, VASILESCU E. Some Aspects Regarding the Influence of the Tribologycal Factors on the Superficial Layers of Treated Steels with Plasma Nitriding. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Dec.2012 [cited 22Dec.2024];35(4):88-4. Available from: https://gup.ugal.ro/ugaljournals/index.php/mms/article/view/2872
Issue
Section
Articles
