Researches Regarding the Elements Loss through Vaporization during the Elaboration Process in LD Converter
Keywords:
oxygen converter, vaporization, sludge, slag, oxygen jet speed, critical carbon content
Abstract
The paper presents a series of researches regarding the vaporization of the component elements of the metallic bath and slag during refining in LD converter. Also, the main factors which influence the vaporization process during steel making in LD converter are studied: the converter atmosphere; the carbon content of the metallic bath; the speed of the oxygen jet; the temperature of the metallic bath; the blowing diagram. Based on these researches we sought to obtain a technology of steel making in LD converter so that the percentage of losses by vaporization is minimum.
Downloads
Download data is not yet available.
References
[1]. Alberny R, Birat P. - “Iron volatilization”, Circulaires d’Informations Techniques 11 (1962), p. 66-70.
[2]. Oprea F, Taloi D, Ivanescu A. -”Theory of the metallurgical processes”, Editura Didactica si Pedagogica, Bucharest (1984).
[3]. Ackermann W: “Mass and energy transfer between the gaseous and liquid phase in oxygen converter”, Stahl und Eisen 9 (1979), p. 36-41.
[4]. Ivanescu A, Ene A, Ivanescu L, Catana C. - “Researches regarding the vaporization process of the existing elements in the metallic bath during steel making in LD converter”, International Conference METAL 2005, Hradec nad Moravici, Czech Republic, paper A6P.
[5]. Mustata C, Munteanu V, Zorlescu D. - ”Mathematical modelling of the steel making in oxygen converter”, Editura Tehnica, Bucharest, 2002.
[2]. Oprea F, Taloi D, Ivanescu A. -”Theory of the metallurgical processes”, Editura Didactica si Pedagogica, Bucharest (1984).
[3]. Ackermann W: “Mass and energy transfer between the gaseous and liquid phase in oxygen converter”, Stahl und Eisen 9 (1979), p. 36-41.
[4]. Ivanescu A, Ene A, Ivanescu L, Catana C. - “Researches regarding the vaporization process of the existing elements in the metallic bath during steel making in LD converter”, International Conference METAL 2005, Hradec nad Moravici, Czech Republic, paper A6P.
[5]. Mustata C, Munteanu V, Zorlescu D. - ”Mathematical modelling of the steel making in oxygen converter”, Editura Tehnica, Bucharest, 2002.
Published
2009-11-15
How to Cite
1.
IVANESCU A, DONIGA A, VASILESCU E, IVANESCU L. Researches Regarding the Elements Loss through Vaporization during the Elaboration Process in LD Converter. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Nov.2009 [cited 5Nov.2024];32(2):78-4. Available from: https://gup.ugal.ro/ugaljournals/index.php/mms/article/view/3042
Issue
Section
Articles
