Vaporisation of the Metallic Bath Component During Refining in Oxygen Converter
Keywords:
oxygen converter, vaporization, sludge, slag, oxygen jet speed, critical carbon content
Abstract
The paper presents a series of researches regarding the vaporization of the component elements of the metallic bath and slag during refining in LD converter. Also, the main factors which influence the vaporization process during steel making in LD converter are studied: the converter atmosphere; the carbon content of the metallic bath; the speed of the oxygen jet; the temperature of the metallic bath; the blowing diagram. Based on these researches we sought to obtain a technology of steel made in LD converter so that the percentage of losses by vaporization is minimum.
Downloads
Download data is not yet available.
References
[1]. R. Alberny, P. Birat, 1962, “Iron volatilization”, Circulaires d’Informations Techniques 11p. 66-70.
[2]. F. Oprea, D. Taloi, A. Ivanescu, 1984, ”Theory of the metallurgical processes”, Editura Didactica si Pedagogica, Bucharest.
[3]. W. Ackermann, 1979, “Mass and energy transfer between the gaseous and liquid phase in oxygen converter”, Stahl und Eisen 9, p. 36-41.
[4]. A. Ivanescu, A. Ene, L. Ivanescu, C. Catana, 2005, “Researches regarding the vaporization process of the existing elements in the metallic bath during steel making in LD converter”, International Conference METAL, Hradec nad Moravici, Czech Republic, paper A6P.
[5]. C. Mustata, V. Munteanu, D. Zorlescu, 2002, ”Mathematical modelling of the steel making in oxygen converter”, Editura Tehnica, Bucharest.
[2]. F. Oprea, D. Taloi, A. Ivanescu, 1984, ”Theory of the metallurgical processes”, Editura Didactica si Pedagogica, Bucharest.
[3]. W. Ackermann, 1979, “Mass and energy transfer between the gaseous and liquid phase in oxygen converter”, Stahl und Eisen 9, p. 36-41.
[4]. A. Ivanescu, A. Ene, L. Ivanescu, C. Catana, 2005, “Researches regarding the vaporization process of the existing elements in the metallic bath during steel making in LD converter”, International Conference METAL, Hradec nad Moravici, Czech Republic, paper A6P.
[5]. C. Mustata, V. Munteanu, D. Zorlescu, 2002, ”Mathematical modelling of the steel making in oxygen converter”, Editura Tehnica, Bucharest.
Published
2008-11-15
How to Cite
1.
IVANESCU L, IVANESCU A, VASILESCU E. Vaporisation of the Metallic Bath Component During Refining in Oxygen Converter. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Nov.2008 [cited 24Nov.2024];31(2):113-8. Available from: https://gup.ugal.ro/ugaljournals/index.php/mms/article/view/3113
Issue
Section
Articles
