The Monitoring of Chattering in Cold Rolling Mill System With Five Stands for Thin Strip
Abstract
Each system (stand – driving) and the continuous rolling line to which it belongs have its own functional and energetically parameters. To reduce any faults of the strip surface it is also necessary to check (eventually having a control line) the roll surface quality, the work roll eccentricity, and depending on the disposal by compensation, of eccentric lobes. The appearance of the specific faults on the rolled strip-during the experiments carried out is duet o the vibrations covered by the range of 100-300 Hz. This many-sided theme needs mathematical patterns to correlate the factors and the dimensions (strip types, technological flow, driving) which should be able to basically support the monitoring system. Taking into account the aspects regarding the quality of the surfaces, the geometry of strips and the costs, it necessary to do a monitoring.
Downloads
References
[2]. Lin, Y. J., Suh, C. S., Langari, R., Noah, S. T., 2003, On the Characteristics and Mechanism of Rolling Instability and Chatter, Journal of Manufacturing Science and Engineering, Vol. 125(4), p. 778-786.
[3]. Poplawski, J.V., and Seccombe, D.A., 1980, Mathematical Modeling of Cold Rolling in Tandem Mills, Iron and Steel Engineer, Vol. 58, p. 47-59.
[4]. Rusinski, E., Moczko, P., Przybyłek, G., 2005, Degradation of roller mills load carrying structure -experimental and numerical identification and investigation of reasons, http://cdm.unipr.it/das2005/papers/88.pdf, accesat 05.2007.
[5]. Voinea, R., Voiculescu D., 1989, Introducere în mecanica solidului cu aplicaţii în inginerie, Editura Academiei.
[6]. Yarita I., Furukawa K. et al., 2004, An Analysis of Chattering in Cold Rolling for vibration gage strip steel. Transaction of the Iron Steel Institute of Japan, 19, nr. 1, p. 1-10.
