The Effect of Fluoride Containing Toothpaste on the Electrochemical Behavior of 316L Stainless Steel for Dentistry Applications in the Human Saliva
Keywords:
orthodontic devices, 316L stainless steel, corrosion, electrochemical methods, saliva, toothpaste
Abstract
The study aims to investigate the effect of fluorinated toothpaste added in Fusayama-Meyer saliva in order to evaluate the electrochemical behavior of 316LSS for dentistry applications.
For electrochemical behavior in situ electrochemical measurements such as: Open circuit potential (OCP), Linear Polarization (PL), Potentiodynamic Polarization (PD) and Electrochemical Impedance Spectroscopy (EIS) were applied. The results show a comparative analysis of the electrochemical behavior and corrosion resistance of 316L-SS in human saliva containing high fluoride toothpaste for dentistry applications. From the electrochemical results it can be concluded that the addition of fluoride toothpaste in Fusayama-Meyer saliva decreases the corrosion resistance of 316L-SS and therefore will reduce the lifetime of dentistry structures or devices.
Downloads
Download data is not yet available.
References
[1]. Dewangan A. K., Patel A. D., Bhadania A. G., Stainless steel for dairy and food industry: a review, J Material Sci Eng, 4: 1000191, 2015.
[2]. Ceschini L., Martini C., Rotundo F., Sliding contacts for the pharmaceutical industry: failure analysis and dry sliding tests for the replacement of hard Cr on AISI 316L steel, Tribol Int, 81: 248-257, https://doi.org/10.1016/j.triboint.2014.09.004, 2015.
[3]. Asri R. I. M., Harun W. S. W., Samykano M., Lah N. A. C., Ghani S. A. C., Tarlochan F., Raza M. R., Corrosion and surface modification on biocompatible metals: A review, Mater Sci Eng C 2017, 77: 1261-1274, https://doi.org/10.1016/j.msec.2017.04.102.
[4]. Holmes D., Sharifi S., Stack M. M., Tribo-corrosion of steel in artificial saliva, Tribol Int, 75: 80-86. https://doi.org/10.1016/j.triboint.2014.03.007, 2014.
[5]. Simionescu N., Ravoiu A., Benea L., Electrochemical in-vitro properties of 316L stainless steel for orthodontic applications, Rev Chim, 70: 1144-1148, 2019.
[6]. Tipanan Y., Pasutha T., Pintu C., Corrosion of metal orthodontic brackets and archwires caused by fluoride-containing products: Cytotoxicity, metal ion release and surface roughness, Orthod Waves, 77: 79-89, 2018.
[7]. Oshida Y., Sellers C. B., Mirza K., Farzin-Nia F., Corrosion of dental metallic materials by dental treatment agents, Mater Sci Eng C, 25: 343-348, 2005.
[8]. Anuwongnukroh N., Dechkunakorn S., Kanpiputana R., Oral hygiene behavior during fixed orthodontic treatment, Dentistry, 7: 1000457, DOI: 10.4172/2161-1122.1000457, 2017.
[9]. Sudjalim T. R., Woods M. G., Manton D. J., Prevention of white spot lesions in orthodontic practice: a contemporary review, Aust Dent J, 51: 284-289. doi: 10.1111/j.1834-7819.2006.tb00445.x, 2006.
[10]. Benyahia H., Ebntouhami M., Forsal I., Zaoui F., Aalloula E., Corrosion resistance of NiTi in fluoride and acid environments, Int Orthod, 7: 332-334, doi: 10.1016/S1761-7227(09)73506-5, 2009.
[11]. Kao C. T., Ding S. J., He H., Chou M. Y., Huang T. H., Cytotoxicity of orthodontic wire corroded in fluoride solution in vitro, Angle Orthod, 7: 7349-354, 2007.
[12]. Alavi S., Farahi A., Effect of fluoride on friction between bracket and wire, Dent Res J, 8: 37-42, 2011.
[13]. Toderascu G., Dumitrascu V., Benea L., Chiriac A., Corrosion behaviour and biocompatibility of 316 stainless steel as biomaterial in physiological environment, Fascicle IX. Metallurgy and Materials Science, 4: 16-22, 2015.
[14]. Hayes A., Sharifi S., Stack M. M., Micro-abrasioncorrosion maps of 316L stainless steel in artificial saliva, J Bio & Tribo-Corros, 1: 1-25, 2015.
[15]. Jiang R., Wang Y., Wen X., Chen C., Zhao J., Effect of time on the characteristics of passive film formed on stainless steel, Appl Surf Sci, 412: 214-222, 2017.
[16]. Benea L., Simionescu N., Effect of biological solution and pH on corrosion resistance of 304L SS for dental brackets, Rev Chim, 71: 180-187. https://doi.org/10.37358/RC.20.4.8056, 2020.
[17]. Benea L., Mardare E., Mardare M., Celis J. P., Preparation of titanium oxide and hydroxyapatite on Ti–6Al–4V alloy surface and electrochemical behavior in bio-simulated fluid solution, Corros Sci, 80: 331-338, 2014.
[18]. Cheng L., Moor S., Kravchuk O., Meyers I., Ho C., Bacteria and salivary profile of adolescents with and without cleft lip and/or palate undergoing orthodontic treatment, Aust Dent J, 52: 315-321, doi: 10.1111/j.1834-7819.2007.tb00508.x, 2007.
[19]. Dumitrascu V. M., Benea L., Improving the corrosion behavior of 6061 aluminum alloy by controlled anodic formed oxide layer, Rev Chim, 68: 77-80, 2017.
[20]. Bard A., Faulkner L., Electrochemical methods. Fundamentals and application, 2-nd. ed. New York: Wiley, 2001.
[21]. Lasia A., Modern Aspects of Electrochemistry, vol 32, ed White RE, Conway BE, Bockris JO’M, New York: Kluwer Academic Plenum Publishers, 1999.
[22]. Brug G. J., Van den Eeden A. L. G., Sluyters-Rehbach M., Sluyters J. H., The analysis of electrode impedances complicated by the presence of a constant phase element, J Electroanal Chem Interf Electrochem, 176: 275-95.https://doi.org/10.1016/S0022-0728(84)80324-1, 1984.
[23]. Benea L., Danaila E., Ponthiaux P., Effect of titania anodic formation and hydroxyapatite electrodeposition on electrochemical behavior of Ti–6Al–4V alloy under fretting conditions for biomedical applications, Corros Sci, 91: 262-271.https://doi.org/10.1016/j.corsci.2014.11.026, 2015.
[24]. Ribeiro D. V., Souza C. A. C., Abrantes J. C. C., Electrochemical impedance spectroscopy (EIS) to monitoring the corrosion of reinforced concrete, Revista IBRACON de Estruturas e Materiais, 8: 529-546, 2015.
[2]. Ceschini L., Martini C., Rotundo F., Sliding contacts for the pharmaceutical industry: failure analysis and dry sliding tests for the replacement of hard Cr on AISI 316L steel, Tribol Int, 81: 248-257, https://doi.org/10.1016/j.triboint.2014.09.004, 2015.
[3]. Asri R. I. M., Harun W. S. W., Samykano M., Lah N. A. C., Ghani S. A. C., Tarlochan F., Raza M. R., Corrosion and surface modification on biocompatible metals: A review, Mater Sci Eng C 2017, 77: 1261-1274, https://doi.org/10.1016/j.msec.2017.04.102.
[4]. Holmes D., Sharifi S., Stack M. M., Tribo-corrosion of steel in artificial saliva, Tribol Int, 75: 80-86. https://doi.org/10.1016/j.triboint.2014.03.007, 2014.
[5]. Simionescu N., Ravoiu A., Benea L., Electrochemical in-vitro properties of 316L stainless steel for orthodontic applications, Rev Chim, 70: 1144-1148, 2019.
[6]. Tipanan Y., Pasutha T., Pintu C., Corrosion of metal orthodontic brackets and archwires caused by fluoride-containing products: Cytotoxicity, metal ion release and surface roughness, Orthod Waves, 77: 79-89, 2018.
[7]. Oshida Y., Sellers C. B., Mirza K., Farzin-Nia F., Corrosion of dental metallic materials by dental treatment agents, Mater Sci Eng C, 25: 343-348, 2005.
[8]. Anuwongnukroh N., Dechkunakorn S., Kanpiputana R., Oral hygiene behavior during fixed orthodontic treatment, Dentistry, 7: 1000457, DOI: 10.4172/2161-1122.1000457, 2017.
[9]. Sudjalim T. R., Woods M. G., Manton D. J., Prevention of white spot lesions in orthodontic practice: a contemporary review, Aust Dent J, 51: 284-289. doi: 10.1111/j.1834-7819.2006.tb00445.x, 2006.
[10]. Benyahia H., Ebntouhami M., Forsal I., Zaoui F., Aalloula E., Corrosion resistance of NiTi in fluoride and acid environments, Int Orthod, 7: 332-334, doi: 10.1016/S1761-7227(09)73506-5, 2009.
[11]. Kao C. T., Ding S. J., He H., Chou M. Y., Huang T. H., Cytotoxicity of orthodontic wire corroded in fluoride solution in vitro, Angle Orthod, 7: 7349-354, 2007.
[12]. Alavi S., Farahi A., Effect of fluoride on friction between bracket and wire, Dent Res J, 8: 37-42, 2011.
[13]. Toderascu G., Dumitrascu V., Benea L., Chiriac A., Corrosion behaviour and biocompatibility of 316 stainless steel as biomaterial in physiological environment, Fascicle IX. Metallurgy and Materials Science, 4: 16-22, 2015.
[14]. Hayes A., Sharifi S., Stack M. M., Micro-abrasioncorrosion maps of 316L stainless steel in artificial saliva, J Bio & Tribo-Corros, 1: 1-25, 2015.
[15]. Jiang R., Wang Y., Wen X., Chen C., Zhao J., Effect of time on the characteristics of passive film formed on stainless steel, Appl Surf Sci, 412: 214-222, 2017.
[16]. Benea L., Simionescu N., Effect of biological solution and pH on corrosion resistance of 304L SS for dental brackets, Rev Chim, 71: 180-187. https://doi.org/10.37358/RC.20.4.8056, 2020.
[17]. Benea L., Mardare E., Mardare M., Celis J. P., Preparation of titanium oxide and hydroxyapatite on Ti–6Al–4V alloy surface and electrochemical behavior in bio-simulated fluid solution, Corros Sci, 80: 331-338, 2014.
[18]. Cheng L., Moor S., Kravchuk O., Meyers I., Ho C., Bacteria and salivary profile of adolescents with and without cleft lip and/or palate undergoing orthodontic treatment, Aust Dent J, 52: 315-321, doi: 10.1111/j.1834-7819.2007.tb00508.x, 2007.
[19]. Dumitrascu V. M., Benea L., Improving the corrosion behavior of 6061 aluminum alloy by controlled anodic formed oxide layer, Rev Chim, 68: 77-80, 2017.
[20]. Bard A., Faulkner L., Electrochemical methods. Fundamentals and application, 2-nd. ed. New York: Wiley, 2001.
[21]. Lasia A., Modern Aspects of Electrochemistry, vol 32, ed White RE, Conway BE, Bockris JO’M, New York: Kluwer Academic Plenum Publishers, 1999.
[22]. Brug G. J., Van den Eeden A. L. G., Sluyters-Rehbach M., Sluyters J. H., The analysis of electrode impedances complicated by the presence of a constant phase element, J Electroanal Chem Interf Electrochem, 176: 275-95.https://doi.org/10.1016/S0022-0728(84)80324-1, 1984.
[23]. Benea L., Danaila E., Ponthiaux P., Effect of titania anodic formation and hydroxyapatite electrodeposition on electrochemical behavior of Ti–6Al–4V alloy under fretting conditions for biomedical applications, Corros Sci, 91: 262-271.https://doi.org/10.1016/j.corsci.2014.11.026, 2015.
[24]. Ribeiro D. V., Souza C. A. C., Abrantes J. C. C., Electrochemical impedance spectroscopy (EIS) to monitoring the corrosion of reinforced concrete, Revista IBRACON de Estruturas e Materiais, 8: 529-546, 2015.
Published
2020-12-15
How to Cite
1.
NEAGA V, BENEA L. The Effect of Fluoride Containing Toothpaste on the Electrochemical Behavior of 316L Stainless Steel for Dentistry Applications in the Human Saliva. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Dec.2020 [cited 24Nov.2024];43(4):34-1. Available from: https://gup.ugal.ro/ugaljournals/index.php/mms/article/view/4036
Issue
Section
Articles
