Mathematical Modeling of the Carbonitriding Process for OLC 25 Steel
Keywords:
steel, carbonitriding, mathematical modeling, simulation
Abstract
The paper is based on research on several experimental carbonitriding regimes of OLC25 steel samples.
Following the experiment for each regime, the HV microhardness values of the treated samples were measured at various points (identical for all samples) along the depth of the carbonitrided layer. The results of these measurements were compiled into a database that was used to create a mathematical model of the carbonitriding process.
The paper presents the results of mathematical modeling based on an active experimental study of the carbonitriding process applied to OLC25 steel samples.
Downloads
Download data is not yet available.
References
[1]. Crainic N., Tratamente termochimice, Editura MatrixRom, București, 2007.
[2]. Gîrbea I. D., Tratamente termice și termochimice – Ghid de laborator, Editura Universității Tehnice din Cluj-Napoca, 2018.
[3]. Țugui A., Oțeluri și tratamente termice, Editura Didactică și Pedagogică, București, 2002.
[4]. Allen J. Fuller Jr., Introduction to Carburizing and Carbonitriding, in ASM Handbook, 2013.
[5]. Mitelea I., Tîțu I., Giurgiu L., Tratamente termice – Teorie și aplicații, Editura Universității „Lucian Blaga” din Sibiu, 2016.
[6]. Marin N., Tratamente termice ale oțelurilor aliate, Editura Universitaria, Craiova, 2014.
[7]. Popescu L. G., Modificări structurale în oțeluri supuse tratamentelor termice, Editura Politehnica, Timișoara, 2011.
[8]. Totten G. E., Tratamentul termic al oțelului: Metalurgie și tehnologii, CRC Press, Taylor & Francis, 2007.
[9]. Crainic N., Tratamente termochimice, Editura MatrixRom, București, 2007.
[10]. Ionescu V., Bazele modelării matematice în inginerie, Editura Politehnica Press, București, 2007.
[11]. Bălan C., Modelare matematică și simulare numerică în inginerie, Editura MatrixRom, București, 2009.
[12]. Dowden John M., The Mathematics of Thermal Modeling: An Introduction to the Theory of Laser Material Processing, Editura: CRC Press, 2001.
[2]. Gîrbea I. D., Tratamente termice și termochimice – Ghid de laborator, Editura Universității Tehnice din Cluj-Napoca, 2018.
[3]. Țugui A., Oțeluri și tratamente termice, Editura Didactică și Pedagogică, București, 2002.
[4]. Allen J. Fuller Jr., Introduction to Carburizing and Carbonitriding, in ASM Handbook, 2013.
[5]. Mitelea I., Tîțu I., Giurgiu L., Tratamente termice – Teorie și aplicații, Editura Universității „Lucian Blaga” din Sibiu, 2016.
[6]. Marin N., Tratamente termice ale oțelurilor aliate, Editura Universitaria, Craiova, 2014.
[7]. Popescu L. G., Modificări structurale în oțeluri supuse tratamentelor termice, Editura Politehnica, Timișoara, 2011.
[8]. Totten G. E., Tratamentul termic al oțelului: Metalurgie și tehnologii, CRC Press, Taylor & Francis, 2007.
[9]. Crainic N., Tratamente termochimice, Editura MatrixRom, București, 2007.
[10]. Ionescu V., Bazele modelării matematice în inginerie, Editura Politehnica Press, București, 2007.
[11]. Bălan C., Modelare matematică și simulare numerică în inginerie, Editura MatrixRom, București, 2009.
[12]. Dowden John M., The Mathematics of Thermal Modeling: An Introduction to the Theory of Laser Material Processing, Editura: CRC Press, 2001.
Published
2025-12-15
How to Cite
1.
NEACȘU M-I. Mathematical Modeling of the Carbonitriding Process for OLC 25 Steel. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Dec.2025 [cited 19Dec.2025];48(4):111-7. Available from: https://gup.ugal.ro/ugaljournals/index.php/mms/article/view/9541
Issue
Section
Articles
