Structure–Morphology–Defect Relationships in CaTiO₃-Based Perovskites for Environmental Applications

Adriana-Gabriela SCHIOPU; Florin CĂLIN-ISTRATE; Monica BÂLDEA; Daniela ISTRATE

doi:10.35219/mms.2026.1.06

Adriana-Gabriela SCHIOPU Doctoral School Materials Science and Engineering, National University of Science and Technology POLITEHNICA Bucharest, Romania; Pitești University Centre, Faculty of Mechanics and Technology, National University of Science and Technology POLITEHNICA Bucharest, Romania
Florin CĂLIN-ISTRATE Uzina de Apă Budeasa, APA CANAL 2000 S.A. Pitești, Romania
Monica BÂLDEA Pitești University Centre, Faculty of Mechanics and Technology, National University of Science and Technology POLITEHNICA Bucharest, Romania
Daniela ISTRATE Doctoral School Materials Science and Engineering, National University of Science and Technology POLITEHNICA Bucharest, Romania

DOI: https://doi.org/10.35219/mms.2026.1.06

Keywords: perovskite, CaTiO3, SWOT analysis, environmental applications, ZnO reinforced composites

Abstract

This review provides a comprehensive and critical analysis of the structure–morphology–defect relationships in CaTiO₃-based perovskites, with an emphasis on their environmental applications, particularly in water treatment and photocatalytic degradation processes. The paper systematically examines the influence of crystal structure, synthesis routes, microstructural evolution, and defect chemistry on the functional performance of CaTiO₃ materials. Special attention is given to the role of crystallographic phase stability, particle size distribution, surface area, porosity, and aggregation phenomena in controlling adsorption capacity and charge carrier dynamics. Different synthesis strategies—including solid-state reaction, sol–gel processing, hydrothermal and microwave-assisted routes, spray pyrolysis, and green mechanochemical methods—are comparatively evaluated with respect to their effects on morphology control and defect formation. Furthermore, the integration of CaTiO₃ with carbon-based materials and the development of doped or composite systems are analysed as strategies for enhancing photocatalytic activity and environmental stability.
By correlating structural features with the physicochemical performance indicators reported in the literature, this review identifies current limitations, unresolved challenges, and promising directions for future research. The analysis aims to provide a coherent framework for the rational design and optimization of CaTiO₃-based perovskites in environmental remediation technologies.

Downloads

Download data is not yet available.

References

[1]. Aung S., et al., Synthesis and Characterization of Calcium Titanate (CaTiO₃) Powder for Photovoltaic Application, J. Myanmar Acad. Arts Sci., vol. 2, 2020.
[2]. Dornellas Athayde D., Synthesis and Characterization of Perovskite Materials for Production of Mixed Ionic and Electronic Conduction Membranes, Ph.D. Thesis, Graduate Program in Chemical Engineering, 2016.
[3]. Loletti M., et al., Structural and Electronic Properties of CaTiO₃ Polymorphs and 2D-Derived Systems: A Theoretical Investigation, Eur. Phys. J. B, vol. 98, no. 4, DOI: 10.1140/epjb/s10051-025-XXXX-X, 2025.
[4]. Lanfredi S., et al., Synthesis and Structural Characterization of Calcium Titanate by Spray Pyrolysis Method, Mater. Lett., vol. 201, p. 148-151, DOI: 10.1016/j.matlet.2017.05.049, 2017.
[5]. Lee S., et al., Synthesis of Lead-Free CaTiO₃ Oxide Perovskite Film through Solution Combustion Method and Its Thickness-Dependent Hysteresis Behaviors within 100 mV Operation, Molecules, vol. 26, no. 18, DOI: 10.3390/molecules26185647, 2021.
[6]. García-Mendoza M. F., et al., CaTiO₃ Perovskite Synthesized by Chemical Route at Low Temperatures for Application as a Photocatalyst for the Degradation of Methylene Blue, J. Mater. Sci.: Mater. Electron., vol. 34, no. 10, DOI: 10.1007/s10854-023-10152-3, 2023.
[7]. Mallik P. K., et al., Characterisation of Sol–Gel Synthesis of Phase Pure CaTiO₃ Nano Powders after Drying, IOP Conf. Ser.: Mater. Sci. Eng., DOI: 10.1088/1757-899X/75/1/012012, 2015.
[8]. Kaur P., et al., Green Synthesis of Nano-Sized Calcium Titanate CaTiO₃ Using Solid State Mechano-Chemical Solventless Method and Its Characterization, Int. J. Res. Eng. Appl. Manag., vol. 4, no. 1, 2018.
[9]. Pandey P. K., et al., Facile and Eco-Friendly One Step Low Temperature Synthesis of Very Large Scale ATiO₃ (A = Ca, Sr, Ba and Cd), J. Appl. Mater. Sci. Eng. Res., vol. 10, no. 1, 2026.
[10]. Naser R., et al., Fabrication of PGS/CaTiO₃ Nano-Composite for Biomedical Application, Int. J. Nanoscience Nanotechnol., vol. 12, 2016.
[11]. Cerón-Urbano L., et al., Nanoparticles of the Perovskite-Structure CaTiO₃ System: The Synthesis, Characterization, and Evaluation of Its Photocatalytic Capacity to Degrade Emerging Pollutants, Nanomaterials, vol. 13, no. 22, DOI: 10.3390/nano13222321, 2023.
[12]. Altin I., Perovskite Type B-CaTiO₃ Coupled with Graphene Oxide as Efficient Bifunctional Composites for Environmental Remediation, Processes, vol. 11, no. 11, DOI: 10.3390/pr11113358, 2023.
[13]. Kostryukov V. F., Igonina A. E., Microwave Synthesis of CaTiO₃ Nanoparticles by the Sol–Gel Method, Kondensirovannye Sredy Mezhfaznye Granitsy, vol. 22, no. 4, p. 504-506, 2020.
[14]. Pinatti I. M., et al., CaTiO₃ and Ca₁₋₃xSmxTiO₃: Photoluminescence and Morphology as a Result of Hydrothermal Microwave Methodology, Ceram. Int., vol. 42, no. 1, p. 1352-1360, DOI: 10.1016/j.ceramint.2015.09.086, 2016.
[15]. Mimura K., et al., One-Step Synthesis of BaTiO₃/CaTiO₃ Core–Shell Nanocubes by Hydrothermal Reaction, J. Asian Ceram. Soc., vol. 9, no. 1, p. 336-342, DOI: 10.1080/21870764.2021.1902713, 2021.
[16]. Anjelin S., et al., Preparation and Characterization of CaTiO₃ Nanopowder by Using Sol–Gel Method, Int. J. Adv. Sci. Res. Manag., vol. 3, 2018.
[17]. Meroni D., et al., Sol–Gel Synthesis of CaTiO₃:Pr³⁺ Red Phosphors: Tailoring the Synthetic Parameters for Luminescent and Afterglow Applications, ACS Omega, vol. 2, no. 8, p. 4972-4981, DOI: 10.1021/acsomega.7b00818, 2017.
[18]. Parajuli D., et al., Structural, Morphological, and Textural Properties of Coprecipitated CaTiO₃ for Anion Exchange in the Electrolyzer, J. Nepal Phys. Soc., vol. 9, no. 1, p. 137-142, DOI: 10.3126/jnphyssoc.v9i1.60468, 2023.
[19]. Wang H., et al., Synthesis and Characterization of the CaTiO₃:Eu³⁺ Red Phosphor by an Optimized Microwave-Assisted Sintering Process, Materials, vol. 13, no. 4, DOI: 10.3390/ma13040879, 2020.
[20]. Zdorovets M. V., et al., Synthesis, Properties and Photocatalytic Activity of CaTiO₃-Based Ceramics Doped with Lanthanum, Nanomaterials, vol. 12, no. 13, DOI: 10.3390/nano12132218, 2022.
[21]. Bantawal H., et al., Vanadium Doped CaTiO₃ Cuboids: Role of Vanadium in Improving the Photocatalytic Activity, Nanoscale Adv., vol. 3, no. 18, p. 5301-5311, DOI: 10.1039/D1NA00341A, 2021.
[22]. Oproescu M., et al., Influence of Supplementary Oxide Layer on Solar Cell Performance, Engineering, Technology & Applied Science Research, vol. 14, no. 2, p. 13274-13282, DOI: 10.48084/etasr.6879, Apr. 2024.
[23]. Schiopu A.-G., et al., Barium Carbonate Synthesized via Hydrolysis: Morphostructural Analysis and Photocatalytic Performance in Polymer and Geopolymer Matrices, Crystals, vol. 15, no. 10, DOI: 10.3390/cryst15100890, 2025.
[24]. Setyaningsih E. P., et al., Preparation of CaTiO₃ Asymmetric Membranes Using Polyetherimide as Binder Polymer, Indones. J. Chem., vol. 16, DOI: 10.22146/ijc.21169, 2016.
[25]. Gaikwad S. S., et al., A Green Chemistry Approach for Synthesis of CaTiO₃ Photocatalyst: Its Effects on Degradation of Methylene Blue, Phytotoxicity and Microbial Study, Der Pharma Chem., vol. 4, p. 184-193, 2012.
[26]. Torimtubun A. A. A., et al., Affordable and Sustainable New Generation of Solar Cells: Calcium Titanate (CaTiO₃)-Based Perovskite Solar Cells, E3S Web Conf., DOI: 10.1051/e3sconf/20183102006, 2018.
[27]. Aziz S. B., et al., Characteristics of PEO Incorporated with CaTiO₃ Nanoparticles: Structural and Optical Properties, Polymers, vol. 13, no. 20, DOI: 10.3390/polym13203478, 2021.