FLAMMABILITY TESTS FOR HEMP SEED OIL

  • Liviu Cătălin ȘOLEA “Dunărea de Jos” University, Faculty of Engineering, Galati, Romania
  • Lorena DELEANU “Dunărea de Jos” University, Faculty of Engineering, Galati, Romania
DOI: https://doi.org/10.35219/mtd.2021.2.01
Keywords: Hemp seed oil, biolubricants, flammability, hot surface

Abstract

The objective of this study was to determine the lowest temperature at which hemp seed oil ignited (505°C) and also the highest temperature at which hemp seed oil did not ignite in at least three tests performed (500°C). The oil was tested on a cylindrical surface heated to various temperatures. A total of 16 tests were carried out to determine these two temperatures as accurately as possible. The tests were performed under the procedure complying with ISO 20823:2018, Petroleum and related products. Determination of the flammability characteristics of fluids in contact with hot surfaces. Manifold ignition test.

Published
2021-07-08
How to Cite
ȘOLEA, L. C., & DELEANU, L. (2021). FLAMMABILITY TESTS FOR HEMP SEED OIL. Mechanical Testing and Diagnosis, 11(2), 5-9. https://doi.org/https://doi.org/10.35219/mtd.2021.2.01
Issue
Vol 11 No 2 (2021)
Section
Articles

All rights are reserved for this publication, which is copyright according to the Romanian law of copyright. Excepting only any fair dealing for the purpose of the private study, research, review, comment and criticism, no part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, mechanical, electrical, electronic, optical, photocopying, recording or otherwise, without the prior express permission of the copyright owners.

Most read articles by the same author(s)