Review of composite materials applications in marine industry
Keywords:
composite materials, planing hull, sandwich structures, FEA.
Abstract
As in many industrial domains, applications of composite materials show a constant growth in the marine industry. The possibility to create a specific combination of materials and engineering proves that they work together better than any of them independently, thus generating a wide range of applications that challenge the naval architects of today. The paper presents a brief review of the development of this class of materials and their advantages for the shipbuilding and boatbuilding industry.
Downloads
Download data is not yet available.
References
[1]. U.S. Department of Defense Handbook: “Composite materials handbook, Volume 3: Polymer matrix composites - materials, design and analysis”, MIL-HDBK 17-3F, Volume 3 of 5, US Department of Defense 2002.
[2]. Strong, A.B., “Fundamentals of composites manufacturing: materials, methods and applications”, second edition, 2007;
[3]. Mallick, P. K., “Fiber-Reinforced Composites - Materials, Manufacturing and Design”, Taylor Fracis Groul LLC, 2007;
[4]. Beznea, E.F. , Chirică, I., “Structuri Compozite”, Galati University Press, 2010, ISBN 978-606-8008-86-8;
[5]. Andrei, G., Dima, D., Bîrsan, I.G., Andrei, L., Cîrciumaru, A., “Effect of Ferrite Particles on Mechanical Behaviour of Glass Fibers Reinforced Polymer Composite”, Revista de Materiale plastice, Vol 46, nr 3, p. 284 - 287, 2009;
[6]. Domnișoru, L., Dragomir, D., Mocanu, C.I., Domnișoru,D., “Proiectarea preliminară structurală a unui vehicul subacvatic din materiale compozite”, Galați University Press, 2010.
[7]. ***, “Composite Material Study: Maturity of Technology Materials and Fabrication, F.I.T.” Structural Composites Laboratory technical report prepared for UNISYS Corporation and U.S. Navy, 1998;
[8]. Davalos, J. F., Qiao, P. Z., Xu, X. F., Robinson, J., and Barth, K. E., “Modeling and characterization of fiber-reinforced plastic honeycomb sandwich panels for highway bridge applications”, Journal of Composite Construction, nr 52, p. 441–452, 2001, DOI: 10.1016/S0263-8223(01)00034-4 ISSN: 0263-8223;
[9]. https://archinect.com/news/article/150165904/the-university-of-maine-sets-three-world-records-by-3d-printing-a-25-foot-long-boat#&gid=1&pid=1
[10]. Davies, J.M., “Design Criteria for Structural Sandwich Panel”, Journal of Structural Engineering 65A (12), p. 435-441, 1987;
[11]. Hassinen, P., “Compression Failure Modes of Thin Profiled Metal Sheet Faces of Sandwich Panels, Sandwich Construction”, Proceedings of the Third International Conference, Southampton, p. 205-214, 1995;
[12]. Davies, J.M., “Sandwich Panels. Thin-Walled Structures”, no 16, p.179-198, 1993;
[13]. Davies, J.M., “Light Weight Sandwich Construction”, Blackwell Science, UK, 2001;
[14]. ***, “International Council for Building Research, Studies and Documentation (CIB) European Recommendations for Sandwich Panels Part 1: Design”, CIB Publication 147, 2000;
[15]. Davies, J.M. and Hakmi, M.R., “Local Buckling of Profiled Sandwich Plates”, Proc. IABSE Symposium, Mixed Structures including New Materials, Brussels, September, p. 533-538, 1993;
[16]. Davies, J.M. and Hakmi, M.R., “Postbuckling Behaviour of Foam-Filled Thin Walled Steel Beams”, Journal of Construction Steel Research, 20, p. 75-83, 1992
[17]. Hibbitt, Karlsson and Sorensen, Inc., (HKS) . “Abaqus User’s Manual, Pawtucket”, RI, USA, 1998;
[18]. ***, “Abaqus user manual, http://abaqus.software.polimi.it/v6.14/index.html”, 2014;
[19]. Davies, J.M., Hakmi, M.R. and Hassinen, P., “Face Buckling Stress in Sandwich Panels”, Proc. Nordic Steel Colloquium, p. 99-110, 1991;
[20]. *** https://docs.plm.automation.siemens.com/data_services/resources/nxnastran/11/
help/tdoc/en_US/pdf/User.pdf;
[21]. Davies, J.M. and Heselius, L., “Design Recommendations for Sandwich Panels”, Journal of Building Research and Information, 21(3), p. 157-161, 1993;
[22]. Pokharel, N. and Mahendran, M., “Local Buckling Behaviour of Sandwich Panels”, Proceedings of the Third International Conference on Thin-Walled Structures, Krakow, Poland, p. 523 – 530. 2001;
[23]. Domnișoru, L., “Metoda elementului finit în construcții navale”, Editura Tehnică, București, 2001, ISBN: 9733120235;
[24]. Hadăr, A., “Probleme locale la materiale compozite”, Universitatea “POLITEHNICA” Bucureşti, 1997;
[25]. Caramatescu, A., Mocanu, C. I., Păcuraru, F. D., Jagîte, G., “Estimation of planing forces in numerical and full scale experiment, International Maritime Association of the Mediteranean, Lisbon, 2017;
[26]. Tudose, V., Gheorghiu, H., Coterlici, R.F., Pastramă, S. D., Tudosege, D., “Studiu privind utilizarea unui compozit armat cu fibre de bumbac pentru obținerea căștilor de protecție”, Industria Textilă, Vol 67 nr. 2, p. 135-140, 2016.
[2]. Strong, A.B., “Fundamentals of composites manufacturing: materials, methods and applications”, second edition, 2007;
[3]. Mallick, P. K., “Fiber-Reinforced Composites - Materials, Manufacturing and Design”, Taylor Fracis Groul LLC, 2007;
[4]. Beznea, E.F. , Chirică, I., “Structuri Compozite”, Galati University Press, 2010, ISBN 978-606-8008-86-8;
[5]. Andrei, G., Dima, D., Bîrsan, I.G., Andrei, L., Cîrciumaru, A., “Effect of Ferrite Particles on Mechanical Behaviour of Glass Fibers Reinforced Polymer Composite”, Revista de Materiale plastice, Vol 46, nr 3, p. 284 - 287, 2009;
[6]. Domnișoru, L., Dragomir, D., Mocanu, C.I., Domnișoru,D., “Proiectarea preliminară structurală a unui vehicul subacvatic din materiale compozite”, Galați University Press, 2010.
[7]. ***, “Composite Material Study: Maturity of Technology Materials and Fabrication, F.I.T.” Structural Composites Laboratory technical report prepared for UNISYS Corporation and U.S. Navy, 1998;
[8]. Davalos, J. F., Qiao, P. Z., Xu, X. F., Robinson, J., and Barth, K. E., “Modeling and characterization of fiber-reinforced plastic honeycomb sandwich panels for highway bridge applications”, Journal of Composite Construction, nr 52, p. 441–452, 2001, DOI: 10.1016/S0263-8223(01)00034-4 ISSN: 0263-8223;
[9]. https://archinect.com/news/article/150165904/the-university-of-maine-sets-three-world-records-by-3d-printing-a-25-foot-long-boat#&gid=1&pid=1
[10]. Davies, J.M., “Design Criteria for Structural Sandwich Panel”, Journal of Structural Engineering 65A (12), p. 435-441, 1987;
[11]. Hassinen, P., “Compression Failure Modes of Thin Profiled Metal Sheet Faces of Sandwich Panels, Sandwich Construction”, Proceedings of the Third International Conference, Southampton, p. 205-214, 1995;
[12]. Davies, J.M., “Sandwich Panels. Thin-Walled Structures”, no 16, p.179-198, 1993;
[13]. Davies, J.M., “Light Weight Sandwich Construction”, Blackwell Science, UK, 2001;
[14]. ***, “International Council for Building Research, Studies and Documentation (CIB) European Recommendations for Sandwich Panels Part 1: Design”, CIB Publication 147, 2000;
[15]. Davies, J.M. and Hakmi, M.R., “Local Buckling of Profiled Sandwich Plates”, Proc. IABSE Symposium, Mixed Structures including New Materials, Brussels, September, p. 533-538, 1993;
[16]. Davies, J.M. and Hakmi, M.R., “Postbuckling Behaviour of Foam-Filled Thin Walled Steel Beams”, Journal of Construction Steel Research, 20, p. 75-83, 1992
[17]. Hibbitt, Karlsson and Sorensen, Inc., (HKS) . “Abaqus User’s Manual, Pawtucket”, RI, USA, 1998;
[18]. ***, “Abaqus user manual, http://abaqus.software.polimi.it/v6.14/index.html”, 2014;
[19]. Davies, J.M., Hakmi, M.R. and Hassinen, P., “Face Buckling Stress in Sandwich Panels”, Proc. Nordic Steel Colloquium, p. 99-110, 1991;
[20]. *** https://docs.plm.automation.siemens.com/data_services/resources/nxnastran/11/
help/tdoc/en_US/pdf/User.pdf;
[21]. Davies, J.M. and Heselius, L., “Design Recommendations for Sandwich Panels”, Journal of Building Research and Information, 21(3), p. 157-161, 1993;
[22]. Pokharel, N. and Mahendran, M., “Local Buckling Behaviour of Sandwich Panels”, Proceedings of the Third International Conference on Thin-Walled Structures, Krakow, Poland, p. 523 – 530. 2001;
[23]. Domnișoru, L., “Metoda elementului finit în construcții navale”, Editura Tehnică, București, 2001, ISBN: 9733120235;
[24]. Hadăr, A., “Probleme locale la materiale compozite”, Universitatea “POLITEHNICA” Bucureşti, 1997;
[25]. Caramatescu, A., Mocanu, C. I., Păcuraru, F. D., Jagîte, G., “Estimation of planing forces in numerical and full scale experiment, International Maritime Association of the Mediteranean, Lisbon, 2017;
[26]. Tudose, V., Gheorghiu, H., Coterlici, R.F., Pastramă, S. D., Tudosege, D., “Studiu privind utilizarea unui compozit armat cu fibre de bumbac pentru obținerea căștilor de protecție”, Industria Textilă, Vol 67 nr. 2, p. 135-140, 2016.
Published
2019-11-26
How to Cite
1.
Caramatescu A, Mocanu CI. Review of composite materials applications in marine industry. Annals of ”Dunarea de Jos” University of Galati. Fascicle XI Shipbuilding [Internet]. 26Nov.2019 [cited 24Nov.2024];42:169-74. Available from: https://gup.ugal.ro/ugaljournals/index.php/fanship/article/view/2498
Issue
Section
Articles
