Analysis of the Propagation of Defects Generated by the Oscillation Marks on Laminated Products
Keywords:
segregation in Sulphur, macroscopic inclusions, fragile silicates, purity of steel
Abstract
In this work was followed the determination of a method of diminishing the depth of the oscillating brands and identifying how the oscillating brands can influence the surface quality of hot rolled products (backgammon and strips). This
study addresses the phenomena that take place at the initiation of the crust in the crystallizer and treats the theoretical aspects of the formation of the oscillating brands on the surface of the cast products continuously. Experiments carried out have enabled to reveal aspects regarding the relationship of oscillation brands – the quality of the products (molded or laminated) and the purity of the continuous cast slabs.
Downloads
Download data is not yet available.
References
[1]. Stanciu C., Research on the performance of system for measuring the cooling speed of brams and blums continuously cast, S.C. ICPPAM Galati, 1995.
[2]. Stanciu C., Researches for the implementation of temperaturediscontinuous measurement systems in the casting pot, S.C. ICPPAM Galati, 1994.
[3]. Constantinescu S., Researches on the effect of the tempering on both structure and properties of thick plates, Metalurgia International, vol. IX, no. 6, p. 12-16, 2004.
[4]. Walanbe T., Mechanical properties of Cr-Mo steels after elevated temperature service, 1st part.: Document II S-IX-116-79, 2nd part.: Document II S-IX-1167-1990.
[5]. Sugiyama T., Kobe steel engineering raport, vol. 25, no. 4, 1995.
[6]. Constantinescu S., Influence of manufacturing process on chemical and structural homogeneity of welded pipe sheets for tanks and vessels working under pressure, Processing Technologies, September 18-21, 2001, Leganes, Madrid, Spain.
[7]. Taffner K., et al., Symposium low alloy high strength steel, Nuremberg 21-23 May 1990.
[8]. Morrison W. B., et al., Controlled process of high strengh low alloy steels, New York, 1996.
[2]. Stanciu C., Researches for the implementation of temperaturediscontinuous measurement systems in the casting pot, S.C. ICPPAM Galati, 1994.
[3]. Constantinescu S., Researches on the effect of the tempering on both structure and properties of thick plates, Metalurgia International, vol. IX, no. 6, p. 12-16, 2004.
[4]. Walanbe T., Mechanical properties of Cr-Mo steels after elevated temperature service, 1st part.: Document II S-IX-116-79, 2nd part.: Document II S-IX-1167-1990.
[5]. Sugiyama T., Kobe steel engineering raport, vol. 25, no. 4, 1995.
[6]. Constantinescu S., Influence of manufacturing process on chemical and structural homogeneity of welded pipe sheets for tanks and vessels working under pressure, Processing Technologies, September 18-21, 2001, Leganes, Madrid, Spain.
[7]. Taffner K., et al., Symposium low alloy high strength steel, Nuremberg 21-23 May 1990.
[8]. Morrison W. B., et al., Controlled process of high strengh low alloy steels, New York, 1996.
Published
2018-06-15
How to Cite
1.
CONSTANTINESCU S. Analysis of the Propagation of Defects Generated by the Oscillation Marks on Laminated Products. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Jun.2018 [cited 26Dec.2024];41(2):34-8. Available from: https://gup.ugal.ro/ugaljournals/index.php/mms/article/view/1443
Issue
Section
Articles
