Research on the Influence of the Complementary Phase Percentage on the Properties of Copper - Based Composites
Keywords:
powder metallurgy, microhardness, abrasive wear
Abstract
The article presents the method to obtain copper matrix composite with CuAl-Fe alloy particles as complementary phase. The samples were obtained by powder metallurgy methods using different percentages of complementary phase: 10, 20, 30, 40, 50% Cu-Al-Fe of average size of 100 µm. After cold pressing at a pressure of 863 MPa samples were sintered at 910 oC for 90 minutes. Characterization of the samples was focused on the microstructural aspects and abrasive wear behavior.
Downloads
Download data is not yet available.
References
[1]. H. N. Ch'ng, J. Pan - Modelling microstructural evolution of porous polycrystalline materials and a numerical study of anisotropic sintering, J. Comput. Phys., 204, 2005, p. 430-461.
[2]. D. Bernard, D. Gendron, J. M. Heintz, S. Bordere, J. Etourneau - First direct 3D visualisation of microstructural evolutions during sintering through X-ray computed microtomography, Acta Materialia, 53, 2005.
[3]. K. K. Chawla - Composite Materials: Science &Engineering, 2nd edition, Springer-Verlag, New York, 1999.
[4]. R. M. German - Sintering Theory and Practice, John Wiley & Sons, New York, 1996.
[5]. Deleanu L., Ciortan S. - Evaluating Tribological Damages by 3D profilometry, EHD Lubrication and Traction, May 6-8, 2010 VAREHD 15, 2010, Suceava, Romania, http://www.varehd.usv.ro/, ISSN 1844-8917, p. 163-169.
[6]. E. Drugescu, O. Potecaşu, F. Potecaşu, M. Marin, V. Mereuta, L. Deleanu - Mechanical properties, abrasive wear behavior and surface quality evaluation of new sintered iron alloys, Rotrib, Universitatea Tehnică „Gh. Asachi“, Iaşi, Tomul LVII (LXI), fasc. 1, 2011.
[7]. Deleanu L., Cantaragiu A., Ciortan S. - Surface Quality evaluated by 3D Functional Parameters, Proceedings of 10th Intern. Conf. “Research and Development in Mechanical Industry”, RaDMI 2010, 16-19 September, Donji Milanovac, Serbia, p. 311-318.
[8]. T. Surdeanu, M. Perneş - Piese sinterizate din pulberi metalice, Editura Tehnică, Bucureşti, 1984.
[2]. D. Bernard, D. Gendron, J. M. Heintz, S. Bordere, J. Etourneau - First direct 3D visualisation of microstructural evolutions during sintering through X-ray computed microtomography, Acta Materialia, 53, 2005.
[3]. K. K. Chawla - Composite Materials: Science &Engineering, 2nd edition, Springer-Verlag, New York, 1999.
[4]. R. M. German - Sintering Theory and Practice, John Wiley & Sons, New York, 1996.
[5]. Deleanu L., Ciortan S. - Evaluating Tribological Damages by 3D profilometry, EHD Lubrication and Traction, May 6-8, 2010 VAREHD 15, 2010, Suceava, Romania, http://www.varehd.usv.ro/, ISSN 1844-8917, p. 163-169.
[6]. E. Drugescu, O. Potecaşu, F. Potecaşu, M. Marin, V. Mereuta, L. Deleanu - Mechanical properties, abrasive wear behavior and surface quality evaluation of new sintered iron alloys, Rotrib, Universitatea Tehnică „Gh. Asachi“, Iaşi, Tomul LVII (LXI), fasc. 1, 2011.
[7]. Deleanu L., Cantaragiu A., Ciortan S. - Surface Quality evaluated by 3D Functional Parameters, Proceedings of 10th Intern. Conf. “Research and Development in Mechanical Industry”, RaDMI 2010, 16-19 September, Donji Milanovac, Serbia, p. 311-318.
[8]. T. Surdeanu, M. Perneş - Piese sinterizate din pulberi metalice, Editura Tehnică, Bucureşti, 1984.
Published
2014-09-15
How to Cite
1.
BOICIUC S, ALEXANDRU P. Research on the Influence of the Complementary Phase Percentage on the Properties of Copper - Based Composites. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Sep.2014 [cited 22Dec.2024];37(3):71-8. Available from: https://gup.ugal.ro/ugaljournals/index.php/mms/article/view/2366
Issue
Section
Articles
