Research on the Corrosion Behavior of the Stainless-Steel Thin Films Coated by PVD Method, Magnetron Assisted
Keywords:
d.c. magnetron, stainless steel deposition
Abstract
The paper follows the corrosion behaviour of X10CrNi 18-8 stainless steel thin films coated by PVD method, magnetron assisted, on glass and copper substrates. It was found that with the increase of the coating time increases of the thickness of the coated layer which leads to the decrease of the corrosion rate. The surface condition can influence the corrosion behaviour through the existing defects and the size of the roughness. Coating uniformity, respectively corrosion, changes with the distance from the axis of symmetry of the magnetron.
Downloads
Download data is not yet available.
References
[1]. Viorica Muşat, Filme subţiri multifuncţionale, Editura CERMI Iaşi, 20, p. 33-59, 2005.
[2]. Thornton J. A., The microstructure of sputter-deposited coatings, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol. 4, p. 3059-3065, 1986.
[3]. Robert-A. Pato, Straturi subtiri multifunctionale de nitrura de titan, Teza de doctorat, Universitatea Tehnica Cluj Napoca, 2011.
[4]. Darja Kek Merl, Ingrid Milosev, Peter Panjan, Franc Zupanic, Morphology and corrosion properties PVD Cr – N coatings deposited on aluminium alloys, MTAEC9, 45(6), 593, Materiali in technologije, ISSN 1580-2949, 2011.
[5]. Levcovici M. S., Vasilescu E., Gheorghieş L. ş.a., Ingineria suprafeţelor, EDP Bucureşti, 2003.
[6]. Vasilescu V., Vasilescu E., Physical–Mechanical and Technological Characteristics of Ti10Zr Alloy for Dental Applications, The Annals of “Dunarea de Jos” University of Galati, Fascicle IX, Faculty of Metalurgy and Materials Science, no. 3, ISSN 1453-083X, 2016.
[2]. Thornton J. A., The microstructure of sputter-deposited coatings, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol. 4, p. 3059-3065, 1986.
[3]. Robert-A. Pato, Straturi subtiri multifunctionale de nitrura de titan, Teza de doctorat, Universitatea Tehnica Cluj Napoca, 2011.
[4]. Darja Kek Merl, Ingrid Milosev, Peter Panjan, Franc Zupanic, Morphology and corrosion properties PVD Cr – N coatings deposited on aluminium alloys, MTAEC9, 45(6), 593, Materiali in technologije, ISSN 1580-2949, 2011.
[5]. Levcovici M. S., Vasilescu E., Gheorghieş L. ş.a., Ingineria suprafeţelor, EDP Bucureşti, 2003.
[6]. Vasilescu V., Vasilescu E., Physical–Mechanical and Technological Characteristics of Ti10Zr Alloy for Dental Applications, The Annals of “Dunarea de Jos” University of Galati, Fascicle IX, Faculty of Metalurgy and Materials Science, no. 3, ISSN 1453-083X, 2016.
Published
2018-12-15
How to Cite
1.
BOICIUC S. Research on the Corrosion Behavior of the Stainless-Steel Thin Films Coated by PVD Method, Magnetron Assisted. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Dec.2018 [cited 22Dec.2024];41(4):55-9. Available from: https://gup.ugal.ro/ugaljournals/index.php/mms/article/view/2760
Issue
Section
Articles
