Researches on the thermal fields analysis at MAG-M mechanized butt welding with solid wire
Abstract
The thermal field has a major influence during the welding process. The heat transfer resulting from welding has an influence on the metallurgical and mechanical properties of steels and welded joints. The most affected regions are: fusion zone (FZ) and heat affected zone (HAZ) due to high temperatures to structural transformations of welded joints. The research is based on the theoretical investigations on high-temperature welding areas through MAG-M mechanized butt welding with solid wire of the naval high strength steel, EH 36. For theoretical research, a model with 3D finite elements was used. For the welded joint, the filler technique was used, which means the filler material is modelled with finite elements. The finite elements are activated when the heat flow passes through them.
Downloads
References
[2] J. Goldak, M. Bibby, J. Moore, R. House, B. Patel, “Computer modelling of heat flow in welds”, Metallurgical Transactions B, vol. 17 B , 587-600, 1986.
[3] P. N. Sabapathy, M. A. Wahab, M. J. Painter, “Numerical models of in service welding of gas pipeline”, Journal of Materials Processing Technology, vol. 118, 14-21, 2001.
[4] G. Ravichandran, V. P. Raghupathy, N. Ganesan, “Analysis of temperature distribution during circumferential welding of cylindrical and spherical components using the finite element method”, Journal of Computer and Structures, vol. 59, No. 2, 225-255,1996.
[5] Y. Ueda, T. Yamakawa, “Analysis of thermal-elastic stress and strain during welding by finite element method”, JWRI, vol. 2, 1971.
[6] H. D. Hibbitt, P. V. Marcal, “A numerical thermo-mechanical model for the welding and subsequent loading of a fabricated structure”, Journal of Computers and Structures, 3, 1153- 1174, 1973.
[7] E. Friedman, “Thermo-mechanical analysis of the welding process using the finite element method”, ASME Journal of Pressure Vessel Technology, 206-213, 1975.
[9] J. M. McDill, A. S. Oddy, “A nonconforming eight to 26-node hexahedron for three dimensional thermal-elasto-plastic finite element analysis”, Journal of Computers and Structures, vol. 54, no. 2, 183-189, 1995.
[10] J. M. McDill, A. S. Oddy, “Arbitrary coarsening for adaptive mesh management in three dimensional automatic finite element analysis”, Mathematical Modelling and Science Computing, vol. 2, 1072-1077, 1993.
[11] J. M. McDill, J. A. Goldak, A. S. Oddy, M. J. Bibby, “Isoparametric quadrilaterals and hexahedrons for mesh-grading algorithms”, Communications in Applied Numerical Methods, vol. 3, 155-163, 1987.
[12] J. M. McDill, A. S. Oddy, M. E. Klien, “Data transfer for 3-D adaptive thermal-elasto- plastic finite element analysis”, Simulation of Materials Processing: Methods and Applications, Shen & Dawson, 1995.
[13] E. Constantin, E. Scutelnicu, C. C. Rusu, L. Mistodie, C. Voicu, D. Boazu, “FEA and experiments in case of pipelines welding”, Proceedings of the 2nd South East European IIW International Congress, Welding - HIGH-TECH Technology in 21st century, Pipeline Welding Current Topic of the Region, Bulgaria, 254-257, 2010.
