Reducing the Zinc Emissions by Upgrading of Steel Scraps Quality
Abstract
The steel production is one of the major sources of heavy metals emissions to the environment. There are several possibilities for prevention and minimization of these pollutants. Emission reduction measures focus on add-on technologies and process modifications (including operating control). The prevention of the raw materials use that may have an unacceptable environmental impact in steel manufacture is important in achieving good environmental performance. A preventive measure specified by steel making BAT is the lowering the zinc-content of scraps. A way to make this possible is to treat these scraps before their charging in the furnace (BOF or EAF). In this paper a method for removing zinc surface layers of galvanized steel scraps is studied. The principle of separation is based on the difference in vapor pressures and stabilities with the formation of zinc and iron chlorides. A series of thermal experiments was carried out in an atmosphere of gaseous HCl. As result of the treatment applied on galvanized steel samples, zinc surface layers were removed and steel scraps remain unattacked.
Downloads
References
[2]. D. Janke, L. Savov, H.-J. Weddige, E. Schulz - Scrap-based steel production and recycling of steel, Mat. in Tehnol. 34(6)387, (2000), p.387-399.
[3].*** - Prospect Material of Informations-Zentrum Weissbleche. V., Kasernenstr. 36, 40213 Düsseldorf, Germany.
[4].*** - Metallic-Coated Products and Specifications, GalvInfoNote 2.4, Rev 1.1 Jan 2011.
[5]. *** - Integrated Pollution Prevention and Control (IPPC), Best Available Techniques Reference Document on the Production of Iron and Steel, March (2000), http://www.mst.dk.
[6]. K. Iimura, H. Ito, M. Chino, T. Morishita, H. Hirata - Behaviour of contaminant heavy metals in soil-plant system. Proc. Inst. Sem. SEFMIA, Tokyo, (1977), p.357.
[7]. P.F.J. Van der Most, C. Veldt - Emission Factors Manual Parcom-Atmos: Emission factors for air pollutants, (1992). TNO, NL (Ed.).
[8]. *** - BAT Guidance Note On Best Available Techniques for the Initial Melting and Production of Iron or Steel, ENVIRONMENTAL PROTECTION AGENCY, December, (2009), http://www.epa.ie.
[9]. M. Larsson, P. Johansson - Surface cleaning of steel scrap (88020), The Steel Eco-Cycle Environmental Research Programme for the Swedish Steel Industry 2004 – 2012, http://www.stalkretsloppet.se/rapporter/pdf/scientific_report_20042008.pdf.
[10]. *** http://www.transportation.anl.gov/materials/dezinc_recycling.html.
[11]. J. Wichterlová, R. Škuta, M. Metzing, D. Matýsek, K. Wichterle - Simultaneous Thermal Decomposition of PVC and Zinc Ferrite, 36th International Conference of SSCHE, May 25–29, 2009, Tatranske Matliare, Slovakia.
[12]. J.K.S Tee, D. J. Fray - Recycling of Galvanised Steel Scrap Using Chlorination, EDP Congress, (1999), The minerals, Metals Materials Society, pp.883-891, (1999).
[13]. J.K.S Tee, D. J. Fray - Removing Impurities from Steel Scrap Using Air and Chlorine Mixtures, JOM, August, (1999), pp. 24-27.
[14]. J.K.S Tee, D. J. Fray - Recycling of Galvanised Steel Scrap Using Chlorination, Ironmaking and Steelmaking, Vol. 32, (2005), No. 6, pp.509-514.
[15]. *** - Steel Eco-Cycle, Closing the Loop in the Manufacture and Use of Steel in the Society, Scientific Report, Phase 1, 2004-2008, www.steelecocycle.com.
[16]. G. Dapper, W. Sloterdijk and C. A. Verbraak - Removal of surface layers from plated materials: upgrading of scrap, Comervcrtion & Recycling, Vol. 2, No. 2. (1978), p. 117-121.
[17]. J.K.S. Tee, D.J. Fray - Recycling of Galvanised Steel Scrap - A Feasibility Study, Paper presented at the R´99 Congress (Recovery, Recycling, Reintegration), February, (1999).
[18]. *** - Standardized Toolkit for Identification and Quantification of Dioxin and Furan Releases, Edition 2.1, December 2005, Prepared by UNEP Chemicals Geneva, Switzerland.
