The Investigation on Dimensional Stability in Some Sintered Powder Metallurgy Alloys
Keywords:
powder, sintering, dimensional stability
Abstract
The subject of this research was to study the effect of sintering time on the dimensional characteristics of some powder metallurgy (PM) materials. The powders used in this study are prealloyed iron-based powders with Cu, Ni and Mo. The powders were single pressed at 600 MPa and the disc specimens have the dimensions of 8-6 mm. The green compacts were sintering in a laboratory furnace at 1150 ºC for 60, 75 and 90 minutes and air-cooled to room temperature. The density of green and sintered specimens, the porosity and the dimensional changes were evaluated.
Downloads
Download data is not yet available.
References
[1]. Jang G. B., Hur M. D., Kang S. S., A study on the development of a substitution process by powder metallurgy in automobile parts, Journal of Materials Processing Technology, p. 110-115, 2000.
[2]. Narasimhan K. S., Sintering of powder mixtures and the growth of ferrous powder metallurgy, Materials Chemistry and Physics, vol. 67, p. 56-65, 2001.
[3]. Chagnon F., Gelinas C., Trudel Y., Development of high density materials for P/M applications, Advances in P/M & Particulate Materials, 3, p. 199-206, 2004.
[4]. Rathore S. S., Dabhade V. V., Dimensional Change During Sintering of Fe–Cu–C Alloys: A Comparative Study, Trans Indian Inst Met, 69: 991, doi:10.1007/s12666-015-0596-7, 2016.
[5]. Lindsley B., Murphy T., Dimensional Control in Cu-Ni Containing Ferrous PM Alloys, Proceedings of the 2006 International Conference on Powder Metallurgy and Particulate Materials. Compiled by W.R. Gasbarre, J.W von Arx, Metal Powder Industry Federation. Princeton, NJ, 10, p.140-153, 2006.
[6]. Cristofolini I., Pilla M., Rao A., et al., Dimensional and geometrical precision of powder metallurgy parts sintered and sinterhardened at high temperature, Int. J. Precis. Eng. Manuf., 14, p. 1735-1742, 2013.
[7]. Wu M. W., Tsao L. C., Shu G. J., Lin B. H., The effects of alloying elements and microstructure on the impact toughness of powder metal steels, Materials Science and Engineering, vol. A 538, p. 135-144, 2010.
[8]. Barbosa A., Bobrovnitchii G., Diegues Skury A. L., Guimaraes R. S., Filgueira M., Structure, microstructure and mechanical properties of PM Fe–Cu–Co alloys, Materials & Design, vol. 31, p. 522-526, 2010.
[9]. Sulowski M., Sintered Structural steels containing Mn, Cr and Mo, The summary of the investigations, Powder Metallurgy Progress, vol. 16, no. 2, p. 59-85, 2016.
[10]. Ramazan Y., Azim G., Hakan K., Effect of FerroMolybdenum Addition on the Microstructure and Mechanical Properties of Sintered Steel, Advanced Materials Research, 23, p. 71-74, 1, 2007.
[11]. Sanjay S. R., Milind M. S., Vikram V. D., Effect of molybdenum addition on the mechanical properties of sinter-forged Fe Cu C alloys, Journal of Alloys and Compounds 649, p. 988-995, 2015.
[12]. Chawla N., Babic D., Williams J. J., Polasik S. J., Effect of copper and nickel alloying additions on the tensile and fatigue behavior of sintered steels, Advances in powder metallurgy & particulate materials, part 5, 104, Princeton, NJ: MPIF, 2002.
[13]. Angel W. D., Tellez L., Alcala J. F., Martinez E., Cedeno V. F., Effect of copper on the mechanical properties of alloys formed by powder metallurgy, Materials and Design, vol. 58, p. 12-18, 2014.
[14]. Marucci M. L., Hanejko F. G., Effect of copper alloy addition method on the dimensional response of sintered Fe-Cu-C steels, Advances in Powder Metallurgy and Particulate Materials, MPIF, p. 1-11, 2010.
[15]. Ramabulana K., et al., Effect of particle size distribution on green properties and sintering of Ti-6Al-4V, IOP Conf. Ser., Mater. Sci. Eng., 655, 012020, 2019.
[16]. Bolzoni L., Ruiz-Navas E. M., Gordo E., Influence of Sintering Parameters on the Properties of Powder Metallurgy Ti-3Al-2.5V Alloy, Materials Characterization, vol. 84, p. 48-57, 2013.
[17]. Singh T., Stephenson T. F., Cambell S. T., Nickel-copper interactions in P/M steels, Advances in Powder Metallurgy and Particulate Materials, compiled by James W. B. and Chernenkoff R. A., Metal Powder Industries Federation, Princeton, NJ, 7, p. 7-93, 2004.
[2]. Narasimhan K. S., Sintering of powder mixtures and the growth of ferrous powder metallurgy, Materials Chemistry and Physics, vol. 67, p. 56-65, 2001.
[3]. Chagnon F., Gelinas C., Trudel Y., Development of high density materials for P/M applications, Advances in P/M & Particulate Materials, 3, p. 199-206, 2004.
[4]. Rathore S. S., Dabhade V. V., Dimensional Change During Sintering of Fe–Cu–C Alloys: A Comparative Study, Trans Indian Inst Met, 69: 991, doi:10.1007/s12666-015-0596-7, 2016.
[5]. Lindsley B., Murphy T., Dimensional Control in Cu-Ni Containing Ferrous PM Alloys, Proceedings of the 2006 International Conference on Powder Metallurgy and Particulate Materials. Compiled by W.R. Gasbarre, J.W von Arx, Metal Powder Industry Federation. Princeton, NJ, 10, p.140-153, 2006.
[6]. Cristofolini I., Pilla M., Rao A., et al., Dimensional and geometrical precision of powder metallurgy parts sintered and sinterhardened at high temperature, Int. J. Precis. Eng. Manuf., 14, p. 1735-1742, 2013.
[7]. Wu M. W., Tsao L. C., Shu G. J., Lin B. H., The effects of alloying elements and microstructure on the impact toughness of powder metal steels, Materials Science and Engineering, vol. A 538, p. 135-144, 2010.
[8]. Barbosa A., Bobrovnitchii G., Diegues Skury A. L., Guimaraes R. S., Filgueira M., Structure, microstructure and mechanical properties of PM Fe–Cu–Co alloys, Materials & Design, vol. 31, p. 522-526, 2010.
[9]. Sulowski M., Sintered Structural steels containing Mn, Cr and Mo, The summary of the investigations, Powder Metallurgy Progress, vol. 16, no. 2, p. 59-85, 2016.
[10]. Ramazan Y., Azim G., Hakan K., Effect of FerroMolybdenum Addition on the Microstructure and Mechanical Properties of Sintered Steel, Advanced Materials Research, 23, p. 71-74, 1, 2007.
[11]. Sanjay S. R., Milind M. S., Vikram V. D., Effect of molybdenum addition on the mechanical properties of sinter-forged Fe Cu C alloys, Journal of Alloys and Compounds 649, p. 988-995, 2015.
[12]. Chawla N., Babic D., Williams J. J., Polasik S. J., Effect of copper and nickel alloying additions on the tensile and fatigue behavior of sintered steels, Advances in powder metallurgy & particulate materials, part 5, 104, Princeton, NJ: MPIF, 2002.
[13]. Angel W. D., Tellez L., Alcala J. F., Martinez E., Cedeno V. F., Effect of copper on the mechanical properties of alloys formed by powder metallurgy, Materials and Design, vol. 58, p. 12-18, 2014.
[14]. Marucci M. L., Hanejko F. G., Effect of copper alloy addition method on the dimensional response of sintered Fe-Cu-C steels, Advances in Powder Metallurgy and Particulate Materials, MPIF, p. 1-11, 2010.
[15]. Ramabulana K., et al., Effect of particle size distribution on green properties and sintering of Ti-6Al-4V, IOP Conf. Ser., Mater. Sci. Eng., 655, 012020, 2019.
[16]. Bolzoni L., Ruiz-Navas E. M., Gordo E., Influence of Sintering Parameters on the Properties of Powder Metallurgy Ti-3Al-2.5V Alloy, Materials Characterization, vol. 84, p. 48-57, 2013.
[17]. Singh T., Stephenson T. F., Cambell S. T., Nickel-copper interactions in P/M steels, Advances in Powder Metallurgy and Particulate Materials, compiled by James W. B. and Chernenkoff R. A., Metal Powder Industries Federation, Princeton, NJ, 7, p. 7-93, 2004.
Published
2022-12-15
How to Cite
1.
MARIN M, MARIN F-B. The Investigation on Dimensional Stability in Some Sintered Powder Metallurgy Alloys. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Dec.2022 [cited 26Dec.2024];45(4):100-3. Available from: https://gup.ugal.ro/ugaljournals/index.php/mms/article/view/5828
Issue
Section
Articles
